Clover Technologies Group HDV4536 Manuál s instrukcemi stáhnout pdf (Strana 30)

30 | Page

8. Prepare Network

Step 1. Select “Network” item on upper main category then by default “IP ADDRESS” tab

should appear as shown on screen below.

Figure 22 IP Address Page

Make sure that DHCP is selected if you have a router that leases IP address to network. If

you want to give the IP Address value to unit directly then uncheck the DHCP check box

and input IP Address directly where (Arrow) is pointing to. Also make sure to

assign proper port number as shown above.

Important Note: when to use DHCP vs. Static IP

DHCP is short for Dynamic Host Communication Protocol where IP address is given to the

DVR and these IP address are leased to the unit. Usually IP address are none routable

internal IP Address. Internal IP address or known as Private IPv4 address, they may be

starting with 192.168.0.0 ~ 192.168.254.254 (16-bit block enabling 65,536 IP address set)

also known as class C IP address, 172.16.0.0 ~ 172.31.254.254 (20-bit block enabling

1,048,576 IP address set) also known as class B address, or 10.0.0.0 ~ 10.254.254.254 (24-bit

block enabling 16,777,216 IP address set) also known as class A address. So if your router

or DHCP server gives the IP address that are class A, B, or C address shown then you can

confirm that there is a DHCP services available on your network but if you get IP address

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 116 117

Žádné komentáře

Clover Technologies Group HDV4536 Manuál s instrukcemi Strana 30